HSN500 Tube Notcher

The HSN500 Tube Notcher Has Large Easy To Read Degree Markings That Allow For Fast Adjustments From Zero To 60 Degrees. It Features A 1 Inch Wide Vise Type Clamp. The Shaft Is Hexagon Machined To Fit A 1/2" Drill Chuck And Can Be Used With A Hand Or Drill Press. The Clamp Is Designed For 9/16" To 2" STD. Bi- Metal Hole Saws.

Ships Complete, Including Mounting Brackets For Drill Press (Less Hole Saw)

  • 100% Heavy Duty Steel Construction

  • Twin Needle Bearings

  • Grease Fitting

  • Vise Type Clamp

  • 1 Inch Shaft (no flex or chatter)

  • 60 Degree of Angle

  • Uses Regular Bi-Metal

HSN-500
Our Price: $199.00
 

HSN501I Tube Notcher

The HSN501I Is Similar To The HSN500 Except It Is Capable Of Performing Off-Set Notches. The 501I's Degree Markings Are CNC Engraved For Added Accuracy. The Needle Bearings Have Been Replaced With Sealed Ball Bearings. If You Want A Heavy Duty Tube Notcher This Is The One For You.

Ships Complete Including Mounting Brackets For Drill Press (Less Hole Saw)
HSN501I
Our Price: $299.00
 

Top Stand Plate

Do it yourselfers! Build Your Own Stand. Both Notchers Can Be Mounted On A Stand And Use A 1/2" Inch Hand Drill To Power The Unit. We Offer A Mechanical Top Stand Plate And A Set Of Plans, So It Will Be Easy To Fabricate The Stand If This Is The Way You Would Like To Mount It.
Part# HSN502SP
Price: $23.00
 

Bi-Metal Hole Saws
 
3/4 inch   $6.50 each
1 inch   $6.50 each
1 1/8 inch   $7.50 each
1 1/4 inch   $7.50 each
1 3/8 inch   $8.50 each
1 1/2 inch   $8.50 each
1 5/8 inch   $9.50 each
1 3/4 inch   $9.50 each
1 7/8 inch   $9.50 each
2 inch   $9.50 each
Call or send email for these items...